Last month I attended a weaving workshop covering double weave, deflected double weave and differential shrinkage techniques. It was held as the part of the Auckland Creative Fibre Spring Education Festival and led by Agnes Hauptli. There were 10 of us and prior to the workshop we were supplied with pre-wound warps to dress our looms, a different one for each student. The workshop was run as a round-robin so that at the end of the workshop we all had a variety of samples to take home, as well as the remainder of the warp on our own looms to weave off. The samples were all wet finished and here are the results.
Back in February I wove a bunch of doubleweave vessels based on the instructions from VAV magazine Nr. 3 2023. I was using corriedale yarn from Anna Gratton instead of the yarn used in the magazine so had to experiment a bit to get the results I wanted. The basic method is to weave a tube, using different yarns and weave structures (plain weave and extended plain weave), which will give you the variations in the diameter of the vessel. Once off the loom you then gather the bottom up to make a base, tidy up the edges however you like and give it a hot wash in the washing machine until it’s felted to your liking. Once you remove it from the washing machine, you have to shape your rather sad looking tube and then leave it to dry.
Off the loomTube gathered at the bottomOut of the washing machine
So when I put on my first warp to further explore what I had been doing at the workshop with Stacey Harvey-Brown I decided to try make some more vessels but this time using 4 warp layers to weave a double layer tube, with the inner tube having a wool warp and the outer tube a cotton warp. The wefts were a mixture of cotton, paper, and wool. Once off the loom I gathered the bottom of the tube and then wet finished it by hand in hot soapy water until I was happy with the results. The shapes and textures of the vessels are caused by the differential shrinkage between the inner and outer tubes, different weft yarns and when and how the inner and outer layers are connected,. I particularly liked the effect the paper yarn produced when used in the weft, you can see that in the upper edges of the vessels.
Exterior of tube before wet finishing The tube turned inside out to show the inner layerThe interior of the vessel before wet finishing
Time to dust this poor, neglected blog off and post some new photos. There’s been a bit happening but the most exciting is our trip to France and London in June. I mentioned in a post way back in September last year that I had been awarded the Creative Fibre Mason Charitable Trust scholarship for 2023, and that I was putting the funds towards a weaving workshop with Stacey Harvey-Brown. The beginning of June saw me and my husband flying to Paris where we spent a fabulous few days sightseeing before heading to the Loom Room France located in the beautiful SW French countryside near Nérac.
Just one of many photos of the Eiffel Tower from our trip.
The Loom Room is a purpose-built studio integrated into a renovated barn, attached to La Tuilerie, a ‘maison de maitre’ which is Stacey and her husband Graham’s house and where we stayed. There were 2 other weaving students staying for the week and we were each had our own weaving programme tailored to what we wanted to learn. While I was off weaving, Dale explored the neighbouring countryside on foot and just generally relaxed.
Outside La TuilerieThe view from our bedroom windowLooking outside from the studioThe garden gate leading to the path in the next photoThe start of morning walks, exploring the country side
We were all staying on site, which meant we shared meals together. Graham cooked us delicious lunches and dinners, and Stacey went into town each morning to get fresh bread and pastries for our breakfast. We also were treated to local wines with our meals and Graham’s own beer from his micro-brewery. When we weren’t weaving Stacey showed us around the neighbouring area including a woad-dyeing business, the Saturday market at Nérac, a couple of bastides (fortified towns), some amazing churches, local artists and several meals out.
But back to the weaving, I was interested in learning about sculptural weaving so Stacey had a 8-shaft table loom ready for me warped up with 4 layers, 2 cotton and 2 wool. My samples didn’t look too exciting on the loom as they were flat plain weave layers. I explored swapping layers, weaving tubes, using different yarns including paper and linen and lastly removing some of the edge warp threads from the woollen layers. The magic all happened on our last weaving day when I took the samples off the loom and wet finished them, with all sorts of ruffling, gathering and shrinking going on. We also discovered during finishing one of the wool layers was probably machine-washable as it didn’t shrink as expected but that just added even more interest to the results . It was so exciting seeing my transformed samples.
Off the LoomBefore Wet FinishingAfter Wet FinishingBefore FinishingAfter FinishingAfter FinishingBefore FinishingAfter FinishingDrying on the line
I had such an amazing time at this workshop, Stacey is such an enthusiastic and inspiring teacher. Since returning home I have been continuing to explore the techniques that I learnt and having fun seeing what I can create.
Kate Alberta Weaving 